Features

• New radius edges designed to suit soft shackle recoveries.
• NATA tested and approved.
• Manufactured from premium grade materials, SPHC oil and pickled steel (not mild steel)
  for maximum strength and highest resistance to rust.
• Working Load Limit of 5,000kg per individual point.
• Supplied as a pair with all hardware included for mounting.
• Powdercoated red for ease of identification – especially when covered in dirt and mud.

Radius Edge

Redesigned radius edge developed with soft shackle
recovery in mind, without compromising the ability of
regular recovery with a bow shackle.

Design and Development

These rated recovery points endure a wide range of
testing, they are NATA tested and approved to verify
strength and design.

These recovery points also undergo extensive
real-world recoveries to ensure a superior rated
recovery point is developed.

Working Load Limit and Distribution

Each recovery point has an individual working load
limit (WLL) of 5,000kg. Designed to connect to your
recovery device via a 4.75t shackle, or rated soft
shackles.

An equalisation strap can be used with two recovery
points, which allows the load to be distributed over
both sides of the vehicle.

Vehicle Mounting

These rated recovery points attach to multiple points of
the chassis distributing the force of the load during a
vehicle recovery.

High tensile bolts are supplied for fitment.

Adjustable Steering Drag Links

Competition Spec Drag Links reduce the likelihood of failure due to impact in severe terrain, featuring adjustable length male rod ends to align and centralise steering after suspension lift.

• 30mm Hollow Construction
• Includes steering damper mounting and greasable tie rod ball joints.
• (Steering Rod in front of axle)
• 2007+ Toyota Landcruiser 76,78,79 (Right Hand Drive): ADL070

Adjustable Steering Track Rods

Competition Spec Drag Links reduce the likelihood of failure due to impact in severe terrain, featuring adjustable length male rod ends to align and centralise steering.

• 30mm Hollow Construction
• Includes greasable tie rod ball joints.
• (Steering Rod behind axle)
• 2007+ Toyota Landcruiser 76,78,79: ATR001

ECB, manufacturers of The World’s Best Alloy Bullbar, have another first to market release of an Alloy Bullbar and a stylish Alloy Nudge Bar range to suit the current model Toyota HiLux WorkMate/Lo-rider 2WD single Cab & Dual Cab. available now for order.

No ECB products will impede on the OEM safety features and will only enhance the vehicle and the safety of its occupants.

ECB Big Tube Bar®
with Bumper Lights

For the ultimate in frontal protection you will find it hard to go past the strength, quality and style of the ECB Big Tube Bar® to suit the current model Toyota HiLux WorkMate/Lo-Rider 2WD (06/19 & on). The single piece channel is fully welded and manufactured from high tensile, structural grade alloys to provide maximum strength. Our Big Tube Bar® incorporates a full width, braced lower protection skirt and the specifically designed steel mounting system ensures a neat and sturdy fit. ECB LED light combinations, air directional cooling vents, and an aerial bracket are all standard features. Your ECB Big Tube Bar® is available in a mirror polished finish or choose from one of our low maintenance powder coat finishes. Our ECB Big Tube Bar® is proudly manufactured in Australia and we offer a lifetime warranty.

ECB Series 2 Nudge Bar

This ECB Series 2 Nudge Bar has been designed specifically to suit the current model Toyota HiLux WorkMate/Lo-Rider 2WD (06/19 & on) and will provide frontal protection and enhance the aesthetics of the vehicle. Designed and manufactured in Australia to suit our harsh conditions, this Series 2 Nudge Bar is designed with a lower centre tube to provide bumper and grille protection and is formed from high tensile alloy tubing that will never rust or corrode. This Series 2 Nudge Bar comes standard with inverted spotlight mounting tabs to mount lights below the lower centre bar. Our Series 2 Nudge Bars are built stronger and substantially lighter than poorer quality, thinner sectioned imported stainless steel alternatives and come with a lifetime warranty. Your ECB Series 2 Nudge Bar is available in a mirror polished finish or choose from one of our low maintenance powder coat finishes.

ECB Type 8 Bar

This ECB Type 8 Bar has been designed specifically to suit the current model Toyota HiLux WorkMate/Lo-Rider 2WD (06/19 & on) and will provide frontal protection and enhance the aesthetics of the vehicle.  Designed and manufactured in Australia to suit our harsh conditions, this Type 8 Bar is designed to provide optimum protection for the bumper, grille and head lights and is formed from high tensile alloy tubing that will never rust or corrode. This Type 8 Bar comes standard with inverted spotlight mounting tabs to mount lights below the lower centre bar. Our Type 8 Bars come with a lifetime warranty.  Your ECB Type 8 Bar is available in a mirror polished finish or choose from one of our low maintenance powder coat finishes.

• 140 degree beam features 15 x 5W and 8 x 3W high lux output Osram LED’s.

• 75W driving light, 24W side shooter spread beam for a combined 99W high lux output delivers a beam distance of over 1.3km.

• 7540 raw lumens and 6000K white light imitates natural daylight.

• Rated to IP67 – Water and dust ingress protection.

• Heavy duty diecast alloy housing with a shockproof polycarbonate lens and stainless steel mounting bracket.

• Operating voltage 10-30V DC.

Styling

Ironman 4×4 bring back the retro style driving lights with the release of the new 5×7 Eclipse LED. The perfect rectangle shape combined with the side shooter spread provides straight up distance with a pleasing amount of spread.

Functionality

The Eclipse LED light is slimline and will fit to most light mounting positions on any vehicle. Designed and engineered to produce the closest imitation light to natural daylight (6000K), the Eclipse provides a beam reach of over 1.3km with a combined wattage of 99W per light.

Construction

A heavy duty diecast alloy housing and shockproof polycarbonate lens ensures durability. The IP67 rating incorporates a one (1) way vent making it more than suitable for river crossings and outback dusty roads.

Specifications:
Combined Output: 99W high lux
Lumens: 7540 (raw) / 5654 (effective)
Lux/10m: 4200lx
Current: 6.48A@12V / 3.21A@24V
LED Chips: 15 x 5W / 8 x 3W High Output Osram

• NATA tested and approved.

• Manufactured from premium grade materials, SPHC oil and pickled steel (not mild steel) for maximum strength and highest resistance to rust.

• Working Load Limit of 5,000kg per individual point.

• Supplied as a pair with all hardware included for mounting.

• Powder-coated red for ease of identification – especially when covered in dirt and mud.

Design and Development

These rated recovery points endure a wide range of testing, they are NATA tested and approved to verify strength and design. They also undergo extensive real-world recoveries to ensure a superior rated recovery point is developed.

Working Load Limit and Distribution

Each recovery point has an individual working load limit (WLL) of 5,000kg. Designed to connect to your recovery device via a 4.75t shackle. An equalisation strap can be used with two recovery points, which allows the load to be distributed over both sides of the vehicle.

Vehicle Mounting

Attaching to the chassis means these recovery points utilise 10.9 grade high tensile bolts for fastening.

Big Tube Bar®
with Bumper Lights

For the ultimate in frontal protection you will find it hard to go past the strength, quality and style of the ECB Big Tube Bullbar® to suit the all new Toyota RAV4 (GX and GXL). The single piece channel is fully welded and manufactured from high tensile, structural grade alloys to provide maximum strength. Our Big Tube Bar® incorporates a full width, braced lower protection skirt and the specifically designed steel mounting system ensures a neat and sturdy fit. ECB LED light combinations, bumper lights, air directional cooling vents and an aerial bracket are all standard features. Your ECB Big Tube Bar® is available in a mirror polished finish or choose from one of our low maintenance powder coat finishes. Our ECB Big Tube Bar® is proudly manufactured in Australia and we offer a lifetime warranty.

76mm Nudge Bar

This ECB Nudge Bar has been designed specifically to suit the all new Toyota RAV4 (GX and GXL) and will provide frontal protection and enhance the aesthetics of the vehicle. Designed and manufactured in Australia to suit our harsh conditions, this Nudge Bar is formed from high tensile alloy tubing that will never rust or corrode. ECB Nudge Bars comes standard with spotlight mounting tabs. Our Nudge Bars are built stronger than poorer quality, thinner sectioned imported stainless steel alternatives and all ECB products come with a lifetime warranty. Your ECB Nudge Bar is available in a mirror polished finish or choose from one of our low maintenance powder coat finishes. 

Series 2 Nudge Bar

This ECB Series 2 Nudge Bar has been designed specifically for the Toyota RAV4 Cruiser and will provide frontal protection and enhance the aesthetics of the vehicle. Designed and manufactured in Australia to suit our harsh conditions, this Series 2 Nudge Bar is designed with a lower centre tube to provide bumper and grille protection and is formed from high tensile alloy tubing that will never rust or corrode. Each Series 2 Nudge Bar comes standard with spotlight mounting tabs. Our Series 2 Nudge Bars are built stronger and substantially lighter than poorer quality, thinner sectioned imported stainless steel alternatives and come with a lifetime warranty. Your ECB Series 2 Nudge Bar is available in a mirror polished finish or choose from one of our low maintenance powder coat finishes. 

Series 2 Nudge Bar

This ECB Series 2 Nudge Bar has been designed specifically for the Toyota RAV4 Cruiser and will provide frontal protection and enhance the aesthetics of the vehicle. Designed and manufactured in Australia to suit our harsh conditions, this Series 2 Nudge Bar is designed with a lower centre tube to provide bumper and grille protection and is formed from high tensile alloy tubing that will never rust or corrode. Each Series 2 Nudge Bar comes standard with spotlight mounting tabs. Our Series 2 Nudge Bars are built stronger and substantially lighter than poorer quality, thinner sectioned imported stainless steel alternatives and come with a lifetime warranty. Your ECB Series 2 Nudge Bar is available in a mirror polished finish or choose from one of our low maintenance powder coat finishes. 

Finish Options

ECB products are finished with the same high standards and exacting methods that are employed in our manufacturing and design processes. When you choose the best products available, you can be sure that they will present as well as they perform.

All ECB products are available in our signature mirror polished alloy finish, or choose from one of our low maintenance powder coat finishes.

• Silver Hammertone
• Black Ripple
• Silver Ripple

Long Range Capacity

145L long range fuel tank, compatible with diesel dual cab models.

We are excited to announce a range of suspension upgrades to suit Toyota Hiace 2005+, coming soon to Ironman 4×4. 

Offering solutions to improve the ride quality, load carrying ability whilst providing a 45mm increase in ride height. 

Ironman 4×4 will offer a range of shock absorbers, with Nitro Gas and Foam Cell.

The Nitro Smart has been designed to integrate with bull bars and bumpers to provide significantly more light output without compromising compliance or the OE look of your vehicle.

The module delivers 1 lux at 500m from the driving light function, in addition to the other functions of fog, DRL and indicator.

Having external adjustment means the units can be tweaked to ensure you get optimum performance with any load.

NO BULL BAR, NO PROBLEM

Nitro Smart can be integrated into almost any vehicle. often replacing the 90mm fog lamp.

URBAN, BUSH OR BEACH

Wherever you’re going, Nitro Smart will be there – without detracting from your vehicles own character and style.

NO SPACE FOR LIGHTS

More gear and more tech means less room for lights. even when you have a bull bar. Nitro Smart replaces the 90mm fog light to give you the performance you need.

KEEP COMPLIANT

Get more light without changing the compliance or safety specifications of your vehicle.

Light Beam Pattern